Instructions: (1)Preparation: isolate and preparc tooth. (2)Cleaning: rinse the preparation with water. (3)Drying: gently air dry until there is not visible water. Do not allow enamel or dentin to dry for an excessive period of time. (4)Applying Dentex Self-Etchingl Light Cure Adhesive (DSA): dispense !-2 drops ofDSA into a mixing well, apply enough DSA to the entire preparation with a little brush until a shiny surface is achievedand then wait for 10 seconds (DSA should not be applied too much). Usc a gentle strcam of air toevaporate the solvent for s seconds. (if using a non self-etching adhesive, an etching step shouldbeused according to the manufacturer's instruction).. (5)Cure; light cure for 20 seconds at 5001 S0mW/cem'. Keep the distance to exposure surface less than 4 mm. (6) Finishing: After light cure, adjust restoration.
Packages: Type: Self-Etching Refil:5.0 mlbottle
Composition: BisGMA Photoinitiator Stablizer Acetone Other ndditives
Appearances Light yellow liquid
Sealing the enamel pits and fssures of eth to aid in the prevention of caries.
Instructions: Due to it selfetching capability, it doesn't need any etching, rinsing and primer. So, the bonding could becompleted by a simple one step in shorter time.. Its god flowability, great wettability and permcabilitysignificantly improve bonding strength. In clinic practicec patice. this adhesive will be ppied on dentin orradical mechanism to form a strong film whichbenamel surface fllowing a light cure afterafter evaporating solvent The light initiates monomers via freeichbonds with both composite and tooth structure.
Indications for use: Ideal for all restoratives Core buildup In-lay and on-layVeneer repairs, porcelain restoration, mctal and non metal bonding